Datalogic SKORPIO Information page 4

FOR AN UNRESPONSIVE OR IMPROPERLY RESPON DING HANDHELD
If the handheld does not respond properly, it may need a reboot. Perform a warm boot first and see if
that fixes the problem. If it does not, then perform a cold boot.
WARM BOOTING THE HANDHELD
To perform a Warm Boot press the Yellow, Blue, and the ESC keys simultaneously.
COLD BOOT THE HANDHELD
THE HANDHELD
1. Turn off the Skorpio X3 by pressing the ON/OFF Power button.
2. Pull the battery latch down and remove the battery pack.
3. Simultaneously press the SCAN key and the Reset button in the battery compartment.
4. Insert the battery pack.
5. Turn on the Skorpio X3 by pressing the ON/OFF Power button.
WARNING: THIS WILL REQUIRE A REINSTALL AND RE-SETUP OF
Skorpio Handheld Information 3