Table of Contents
Advertisement
MAINTENANCE
5.1
GENERAL
The CO
scrubber does not require any maintenance other than refilling the canister if the
2
adsorbent becomes ineffective. If the motor fails, the whole unit should be replaced. Replacing
the motor unit can be done in a matter of seconds. After removing the canister, the motor unit
can be removed from the mounting bracket by loosening the locking screw.
5.2
SPARE PARTS AND ACCESSORIES
Description
Scrubber complete, pre-set speed
Scrubber complete, external speed control
Scrubber complete, Aisi pre-set speed
Scrubber complete, Aisi external speed control
Scrubber motor, pre-set speed
Scrubber motor, external speed control
Canister assembly (including canister O-ring)
Canister O-ring 105.00 x 6.00
Canister Cover plate
Sofnolime (Sodalime) CO2 absorbent
Contamination canister
Refill Contamination canister
Motor Housing O-ring 75.00 x 6.00
Motor Housing O-ring 72.00 x 2.50
Motor Cover plate O-ring 14.00 x 2.50
Motor lid\ \Scrubber/Heater Motor\AISI316L/1.4404
Contra connector (motor)
19
Chapter 5
IHCHYTECH.COM
5
Part number
3.80.1018-1V
3.80.1018-1E
3.80.2938-1V
3.80.2938-1E
3.80.1018-2V
3.80.1018-2E
3.80.973
H.70.00310
3.80.2343
T.99.02896
2.80.3963
T.98.00552
H.70.00292
H.70.00293
H.70.00291
3.50.5932
H.10.00133
Advertisement
Table of Contents
