Table of Contents
Advertisement
INSTALLATION
3.1
MECHANICAL
The scrubber can be mounted in any position, but vertical position is preferred. If the scrubber is
mounted in vertical position, keep the motor on the bottom side for easy changing of the
canister.
NOTE
A free space of at least 75 mm (3") must be provided on each side of the unit to ensure proper
gas flow. Also keep free space on the side of the canister for removal of the canister.
3.2
ELECTRICAL
The scrubber can be used with a pre-set speed or external speed control function. Use the
specified pins on the connector and place the jumper inside the scrubber to configure the desired
function. See table and pictures for pre-set speed and external speed configuration.
Figure 3.1
USER MANUAL CO2 SCRUBBER VERSION CS-2019-09
2
3
1
4
Electrical connections
5
6
7
Chapter 3
3
13
Advertisement
Table of Contents
