Table of Contents
Advertisement
4.2.1.3
4.3
REPLACING OR REFILLING THE CANISTER
A
Figure 4.1
Before replacing or refilling the canister, switch off the scrubber motor.
1.
Remove the canister from the scrubber motor by turning the canister counter-clockwise (A).
2.
Place the canister on the bayonet with the cover plate facing upwards (B).
3.
Remove the cover plate by turning it counter-clockwise (B).
4.
Replace the adsorbent.
5.
Mount the cover plate.
6.
Mount the canister on the scrubber motor.
7.
The scrubber motor is now ready for use.
USER MANUAL CO2 SCRUBBER VERSION CS-2019-09
PERFORMANCE AT 9 MSW
Canister
B
Chapter 4
17
Advertisement
Table of Contents
