Maintenance; Seat Adjustment - Stamina Folding Recumbent Bike 15-0200A Owner's Manual

Stamina products, inc 15-0200a folding recumbent bike owner's manual
Table of Contents

Advertisement

OPERATIONAL INSTRUCTIONS

SEAT ADJUSTMENT

Proper seat adjustment is important.
1.
Turn the ADJUSTMENT KNOB(41) to loosen, then pull
the ADJUSTMENT KNOB(41) to release the pin. Slide
the SEAT FRAME(5) until the SEAT(43) is at the proper
height. Release the ADJUSTMENT KNOB(41) making
sure the pin catches in one of the holes of the SEAT
FRAME(5) and tighten the ADJUSTMENT KNOB(41).
2.
Sit on the seat and place your feet on the pedals. You
should be able to move through a complete pedal stroke
without locking your knees or shifting your hips on the
seat. The seat is too close to the pedals if you have more
than a slight bend in your knees at the bottom of the pedal
stroke. The seat is too far from the pedals if you have to
completely straighten your knees at the bottom of the
pedal stroke. Refer to the illustration.
CAUTION:
1.
Do not attempt to adjust the seat while you are on the
INTONE
Folding Recumbent Bike.
2.
Always tighten the ADJUSTMENT KNOB(41) after
adjusting the seat to a new position.
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(29) clockwise.
To decrease the load, turn the TENSION KNOB(29) counterclockwise.

MAINTENANCE

The safety and integrity designed into the INTONE
when the INTONE Folding Recumbent Bike is regularly examined for damage and wear. Special attention
should be given to the following:
1.
Adjust the TENSION KNOB(29) and verify that the Magnetic System provides tension. The Magnetic
System should provide many years of use.
2.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
4.
Worn or damaged components shall be replaced immediately or the INTONE
Bike removed from service until repair is made.
5.
Only Stamina Products supplied components shall be used to maintain/repair the INTONE
Recumbent Bike.
6.
Keep your INTONE
Folding Recumbent Bike clean by wiping with an absorbent cloth after use.
Folding Recumbent Bike can only be maintained
11
Folding Recumbent
Folding

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intone 15-0200a

Table of Contents