Page 2
Safety Instructions Before using this product, please read and follow all the following safety instructions, and keep this manual for future reference. Failure to follow the instructions and safety precautions in this manual may cause damage to the product. NOTE: CAUTION: 1....
Table of Contents In the Box About Your Ironpie Get Started Charging Start Cleaning Pause, Recharge, and Shutdown App Installation Water Tank Dustbin Cleaning Water Tank and Cleaning Cloth Care Brush Care and Cleaning Charging Contacts, Cliff Sensor, and Wheels Troubleshooting Indicator Lights Specifications...
About Your Ironpie Back View Front View Cliff Sensor Side Brushes Power Button Drive Wheels Recharge Button Dustbin Camera Surface Cover Omnidirectional Lens Dustbin Release Button Charging Contacts Front Wheel Battery Main Brush Assembly...
Page 6
Dustbin Charging Station Signal Indicator High Efficiency Strainer Filter Door Primary Filter Strainer DC Plug Dustbin Conductive Sheet Dustbin Metal Sheet Dustbin Side Cover Charging Contacts...
Get Started Remove Protection To get started, remove the protective strips on the robot and the protective film on the charging station. Remove the protective strips Remove the protective film...
The robot will automatically return to the charging station when the battery is low. You can also hit the Recharge button on the robot or through Trifo Home app to charge the robot manually. 2. Plug the adapter into a standard electrical outlet and into Attention: Ironpie’s charging port.
Start Cleaning The Ironpie m6+ creates a logical zigzag cleaning pattern to cover your entire floors. To wake up the robot, long press the Power button until you hear the startup sound. Short press the Power button once again to start cleaning. Pause, Recharge, and Shutdown Pause: Press the Power button to pause the operation.
App Installation Download“Trifo Home”app from Google Play or Apple's App Store. Connect your mobile device to a 2.4GHz and 802.11b/g/n bands Wi-Fi network. 1. Create an account with your 3. Select the product model you 4. Please first make sure the 2.
Page 11
5. Enter the Wi-Fi password, 6. A QR code will be generated 8. Name your robot and you’re 7. Please wait for the connection then click “Next”; on your phone. Use the all set! process. It will take about 2 camera on the robot to scan minutes;...
Water Tank ** When mopping, do not use the Ironpie m6+ in areas where wetness can damage carpets, rugs, or unfinished/ unsealed floors. ** When mopping is finished, empty any remaining fluid from the water tank and remove the cleaning cloth. 1.
Dustbin Cleaning A. Press the dustbin release button. C. Empty the dustbin. B. Open the side cover of the dustbin. D. Open the filter door.
Page 14
E. Take out the High Efficiency Strainer and the Primary G. Scrub the dustbin with a cloth. Filter Strainer before you remove the debris. F. Rinse the Primary Filter Strainer only. Do not rinse the High Efficiency strainer.
Page 15
H. Dry the dustbin and filters, and keep it dry to maximize its lifespan. Note: We recommend rinsing the Primary Filter Strainer 15 to 30 days after first use. The maximum lifespan of the High Efficiency Strainer is 3 months. I.
Water Tank and Cleaning Cloth Care 1. Remove the water tank. 4. Wash the cleaning cloth. 2. Remove the cleaning cloth. 5. Dry the cleaning cloth. 3. Empty the water tank. 6. Air dry or towel dry the water tank.
Brush Care and Cleaning 1. Open the main brush cover. 3. Clean the tangled hair. Clean main brush 2. Take out the main brush shaft. Clean side brushes...
Charging Contacts, Cliff Sensor, and Wheels Tips: Please use a dry cloth to clean the charging contacts, the cliff sensor and the bumper to avoid damage to sensitive electronic components. Clean the charging contacts. Clean the drive wheels and the caster wheel. Clean the cliff sensor.
Troubleshooting Prompt Tone What To Do Make sure the charging station is plugged in, then place the robot on the Transport robot back to dock charging station to charge. Side brush stuck Check if the side brush gets entangled with hair or debris and clean it up. Main brush stuck Check if the main brush gets entangled with hair or debris and clean it up.
Page 20
Check if the front wheel can move freely. If not, unscrew the front wheel Front wheel stuck and clean it up. Connection failed Ensure the robot is connected to a 2.4GHz and 802.11b/g/n bands. Connection failed, password error Double check that you filled in the correct Wi-Fi password.
Indicator Lights Indicator Light What It Means Power button: solid green Power is on and the robot is running properly. Power button: solid red The robot is not functioning. Power button: solid green Battery is low. Recharge button: flashing yellow Power button: solid green The robot is looking for the charging station.
Charging time * With a full charge, the Ironpie m6+ will clean for approximately 100 minutes. Power 28 watts System Operating voltage 14.4 volts * This information is subject to change, and Trifo reserves the right to update the product specifications.
Page 23
Harmful Substance Component Pb/Pb Hg/Hg Cd/Cd Cr(VI)Cr(VI) PBDE compound compound compound compound Plastic Hardware Host circuit module Electronic Battery Plug power cord (Metal part) Description: This form is prepared in accordance with the provisions of SJ/T 11364. 〇 : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in the current valid version of GB/T26572.