Page 2
Safety Regulations Before using this product, please read and follow all the following safety instructions, and keep this manual for future reference. Any operation inconsistent with this instruction manual may cause damage to this product. Note: Warn: 1. Only authorized technicians can disassemble this product. Users are not 1....
Product Composition / Parts Back View Front View Cliff Sensor Side Brush Power Button Drive Wheel Recharge Button Camera Dustbin Surface Cover Omnidirectional Lens Dustbin Button Charging Pole Piece Caster Wheel Battery Main Brush Assembly...
Page 6
Dustbin Charging Base Signal Indicator High Efficiency Strainer High Efficiency Net Cover Primary Filter Strainer DC Plug Dustbin Conductive Sheet Dustbin Metal Sheet Dustbin Side Cover Charging Pole Piece...
Product Usage / Preparation Remove Protection Before using the robot, remove the protective strip on the robot and the protective film on the charging base. Remove the protective strip Remove the protective film...
Product Use / Charging 1. Place and charge: the charging base should be placed against 4.Charging: place the robot on the charging base for charging. the wall and on the flat ground. Do not place any items within (The charging cycle takes about 5 hours.) the range of 0.5m left and right and 1.5m ahead.
Product Use / Start Cleaning Based on your home environment, the robot will perform cleaning with a “zigzag” path to cover your home. Setting method: When the robot is powered off, long press the Power button. After the start music is played which indicates the robot is powered on, short press the Power button, and the robot will start cleaning automatically.
Product Usage / App Installation and Settings Search the “Trifo Home” app in iOS App Store or Android Play Store, download, and install. Please make sure your phone is connected to 2.4GHz and 802.11b/g/n bands Wi-Fi router. trifo trifo-02 1. Open the “Trifo Home”, 2.
Page 11
5. Enter the Wi-Fi password, 6. A QR code will be generated 7. Please wait for the connection 8. The robot and app will both then click “Next”; on your smartphone. Please process. It will take about 2 give hints to inform the make sure the QR code facing minutes;...
Component Maintenance / Dustbin A. Press the dustbin button to remove the dustbin. C. Empty the dustbin. B. Open the side cover of the dustbin. D. Open the high efficiency net cover.
Page 13
E. Open the high-efficiency screen cover, take out the G. Scrub the dustbin with a cloth. Please do not let water high-efficiency screen and the primary-efficiency seep into the fan port during cleaning. screen, and tap gently against the trash container to remove the debris.
Page 14
H. Dry the dustbin and filters, and keep it dry to maximize its lifespan. Note: It is recommended to wash the primary strainer with water 15 - 30 days after it is used. The maximum lifespan of the high efficiency filter screen is 3 months.
Component Maintenance / Main Brush and Side Brush 1. Open the main brush cover. 3. Clean the tangled hair. Cleaning main brush 2. Take out the main brush shaft. Cleaning side brush...
Component Maintenance / Charging Pole Piece, Cliff Sensor, Drive Wheel, and Caster Wheel Tips: The interior of the charging pole piece, the cliff sensor and the bumper contain sensitive electronic components. Please use dry cloth to clean. Please prevent any water contact or using a wet cloth to clean. Clean the charging pole piece.
Investigation of Common Issues Prompt Tone Solution Plug in power to charging base; Transport robot back to dock Place charging base as instructed; Move robot close to charging base. Drive wheel not on surface Please put the robot back to the ground and press the Power button again. Drive wheel stuck Check whether the drive wheel is entangled with objects and clean it up.
Page 18
Dustbin missing Put the dustbin back to the robot correctly. Dustbin full Clean dustbin. Check if the battery is installed correctly before being recharged. Please make sure the robot could be powered on. Charging error If any abnormal sign happens during recharging, it may be either robot or charging base displaced.
Indicator Lights Explanation Indicator Light Robot Working Status Power button solid green Normal working mode Power button solid green and recharge button flashing yellow Battery low Power button solid green and recharge button solid yellow Looking for charging base Recharge button solid yellow Recharging Power button flashing green and recharge button flashing yellow alternately Network configuration mode...
600 ml Cleaning Each charging period about 300 minutes about 100 minutes Each cleaning period Rated power 28 watts System Operating voltage 14.4 volts * This information is subject to change, and Trifo reserves the right to update the product specifications.
Page 21
Harmful Substance Component Pb/Pb Hg/Hg Cd/Cd Cr(VI)Cr(VI) PBDE compound compound compound compound Plastic Hardware Host circuit module Electronic Battery Plug power cord (Metal part) Description: This form is prepared in accordance with the provisions of SJ/T 11364. 〇 : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in the current valid version of GB/T26572.