CORRECT CRAFT LINC PAN0RAY 2020 Owner's Manual page 33

LINC PAN0RAY
HO ME ME NU
M AIN TA B - SUR F SP E E D ( 2 1 0 a n d 2 3 0 M o d e l s )
Hydro-Gate Setting - used to control steepness and can be used in
conjunction with NSS setting. As with NSS, having a Hydro-Gate setting
of 5 would create the steepest wakesurf wave. A Hydro-Gate setting of 0
would create the most ramp-like wave. Unlike NSS, a Hydro-Gate setting
of 5 tends to create the cleanest wave and having a NCRS setting of 0
tends to create a wave more likely to "wash out".
Surf Side - displays which side the surf wave is on. The wave icon with
the arrow pointing to the left indicates the Port side and the wave icon
with the arrow pointing to the right indicates the Starboard side (driver's
side). In the screenshot, the surf wave is set on the Port side. To change
which side the surf wave is on, simply press the surf wave icon that is
not highlighted. If the operator presses the surf wave icon that is not
highlighted while driving at set speed, the surf wave will quickly move to
that side.
Please note that in Fig. C6 the actual speed is listed at 0.0 mph, meaning the
boat is not moving and is not traveling at the set speed of 10.5 mph. Because the
boat is not at the set speed, the NSS Setting and Hydro-Gate Setting numbers
are shown in an Orange color; this is to let the operator know that the NSS plates
and the Hydro-Gate are not at their set position. When set speed is achieved,
those numbers will change to a light blue/white color to notify the user that those
plates have moved to their set position. Changing the NSS or Hydro-Gate settings
before the boat is close to set speed (while NSS and Hydro-Gate numbers are
33