CORRECT CRAFT LINC PAN0RAY 2020 Owner's Manual page 29

LINC PAN0RAY
H OM E ME NU
M AIN TA B - SU RF SP E E D ( G a n d G S M o d e l s )
NCRS Setting - used to control steepness and can be used in conjunction
with NSS setting. As with NSS, having an NCRS setting of 5 would create
the steepest wakesurf wave. An NCRS setting of 0 would create the most
ramp-like wave. Unlike NSS, an NCRS setting of 5 tends to create the
cleanest wave and having a NCRS setting of 0 tends to create a wave
more likely to "wash out".
Surf Side - displays which side the surf wave is on. The wave icon with
the arrow pointing to the left indicates the Port side and the wave icon
with the arrow pointing to the right indicates the Starboard side (driver's
side). In the screenshot, the surf wave is set on the Port side. To change
which side the surf wave is on, simply press the surf wave icon that is
not highlighted. If the operator presses the surf wave icon that is not
highlighted while driving at set speed, the surf wave will quickly move to
that side.
Please note that in Fig. C3 the actual speed is listed at 0.0 mph, meaning the boat
is not moving and is not traveling at the set speed of 11.2 mph. Because the boat
is not at the set speed, the NSS Setting and NCRS Setting numbers are shown in
an Orange color; this is to let the operator know that the NSS and NCRS plates
are not at their set position. When set speed is achieved, those numbers will
change to a light blue/white color to notify the user that those plates have moved
to their set position. Changing the NSS or NCRS settings before the boat is close
to set speed (while NSS and NCRS numbers are orange) will have no immediate
29