Table of Contents
Advertisement
LINC PAN0RAY
HOME MEN U
MAIN TAB - WA KE BO A R D SP E E D ( G a n d G S M o d e l s )
The user has two settings he or she can use to interact with the NCRS system,
these two questions to decide how to set the NCRS:
Do I want help with planing and staying on plane in tight turns?
Plane Assist
Deploy feature which will move the Hydro-Plate to position targets based
on the Plane Assist setting, ballast levels, and dynamic conditions
b. Low - the Hydro-Plate will move up or down in smaller increments to
help the boat get on plane quickly and stay on plane in tight turns. This
setting is recommended for boats that are lightly loaded and have a
small number of passengers
c. High - the Hydro-Plate will move up or down in larger increments to
help the boat get on plane quickly and stay on plane in tight turns. This
setting is recommended for boats that are heavily loaded and have a
large number of passengers
How large/steep do I want the wake once my desired speed is
reached?
NCRS Setting – This allows the user to enter a value of 0 to 5 which
position once the boat has reached its desired Set Speed.
a. 0 – Smallest and Most Rounded Shaped Wake
b. 5 – Largest and Most Vert Shaped Wake
27
Advertisement
Table of Contents
