Adjust The Screen Timeouts; Clean Screen; Routine Care - Honeywell Home 6290W User Manual

Adjust the Screen Timeouts

When the keypad is left idle, it automatically:
• turns the "Backlight Off After" the selected backlight off time has expired (unless "Never" option is selected).
• returns to the Home/Security screen after the selected "To Homepage After" time has expired (unless "Never" option is selected),
and if enabled, the "Auto Slideshow After" time begins the slide show.
To select the desired screen timeouts, from the Home/Security screen, do the following:
ICON
1. Select the Settings icon.
2. Select the Disp & Audio Setup icon.
3. Enter your "Authorized Code", if required.
4. Select from the drop-down list displaying the
time period for each option.

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free. Clean the Touchscreen as follows:
ICON
1. Select the Settings icon.
2. Select the Disp & Audio Setup icon.
3. Enter your "Authorized Code", if required.
4. Select the CLEAR SCREEN icon to disable
the keypad for 30 seconds.
5. Select Continue to disable the touchscreen.
6. Select Cancel to exit.
NOTE: The Emergency screen cannot be accessed while running in the clean screen mode
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the touchscreen or damage may occur.

Routine Care

• Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected doors or
windows.
• Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and smoke detectors.
• Keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water or any other fluid on the units.
Setup (cont'd)
ACTION
If changes are made, when you exit a Settings Changed! pop-up window is
displayed asking "Remember New Settings?"
Settings include: Backlight Off After X time, Return To Homepage After X
time, Auto Slideshow After X time.
Select
ACTION
At the "Touch Screen Disabled for =30 Seconds" screen, the touchscreen
should be wiped clean of fingerprints using a mild soap solution and a soft
cloth. When the counter reaches zero, the window automatically closes and the
touchscreen is active.
A pop-up window displays "Touch Screen will be disabled so that you may
wipe the screen clean. Please use a damp, soft cloth. DO NOT use any
liquids, sprays, or ammonia-based cleansers.
disable touchscreen." **Panics cannot be initiated during this process**
NOTES
to save. Select to return to the previous screen.
NOTES
.
17
Touch
CONTINUE to