Table of Contents
Advertisement
Instructing the user
▶ Instruct users as to how the appliance functions, as well as how to
operate the system as a whole.
▶ Explain that conversions and maintenance must only be carried out by
an authorised contractor.
▶ Point out the need for inspections and maintenance for safe and
environmentally friendly operation.
▶ Hand these installation and maintenance instructions to the user.
Point out that these instructions must be kept and passed on to the
next owner/user.
1 2
2
1
13
12
11
10
2
AGS10-2, AGS20-2, AGS50-2
Fig. 2 Single and twin-line solar pump stations without front insulation parts and without integral controllers and modules
[1]
Ball valve with thermometer (red = flow
integrated check valve
(position 0° = normal running, 45° = check valve bypassed)
[2]
Compression fitting
[3]
Pressure relief valve
[4]
Pressure gauge
1) Not for single-line solar pump stations
AGS10-2, AGS10E-2, AGS20-2, AGS50-2
3
4
5
6
7
6
9
2
1)
, blue = return) and
Information on the solar pump station | 3
2
Information on the solar pump station
2.1
Product description
If you wish to open the solar pump station:
▶ Pull the cover (insulation part) forwards.
The illustrations in this manual show the twin-line solar
pump station with external solar controller.
Fig. 1
3
4
5
6
6
8
8
[5]
Connection for expansion vessel
[6]
Drain & fill valve (DFV)
[7]
High-efficiency pump (with power cable and sensor cable)
[8]
Flow limiter, type A
[9]
Flow limiter, type B
1)
[10] Air separator
[11] Control/shut-off valve
[12] Holder for wall mounting
1)
[13] Ventilation
6720801165.05-2.ST
12
2
1
7
11
2
AGS10E-2
6720801165.06-2.ST
6 720 811 270 (2015/04)
Hide quick links:
Advertisement
Table of Contents
