Table of Contents
Advertisement
6/60
About this documentation
Bosch Rexroth AG, A7VO Series 63, RE 92202-01-B/08.2012
1.3 Display of information
Standardized safety instructions, symbols, terms and abbreviations are used so that
you can use this documentation to work quickly and safely with your product. To give
you a better understanding they are explained in the sections below.
1.3.1 Safety instructions
This documentation includes safety instructions in chapter 2.6 "Product-specific
safety instructions" on page 36 and in chapter 3 "General instructions on damage
to equipment and the product" on page 13 and before a sequence of actions or
an instruction for action involving a risk of personal injury or damage to equipment.
The described danger prevention measures must be observed.
Safety instructions are set out as follows:
Type and source of danger!
Consequences in case of noncompliance
▶
Measure for danger prevention
▶
<List>
• Safety sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: names the type and source of the danger
• Consequences: describes what occurs if the safety instructions are not
complied with
• Precautions: states how the danger can be avoided
Table 2: Danger classes in accordance with ANSI Z535.6-2006
Safety sign, signal word
DANGER
wARNING
CAUTION
NOTE
SIGNAl wORD
Meaning
Identifies a dangerous situation that will result in death or
serious injuries if it is not avoided.
Identifies a dangerous situation that may result in death or
serious injuries if it is not avoided.
Identifies a dangerous situation that may result in minor to
moderate injuries if it is not avoided.
Damage to equipment: The product or the environment may
be damaged.
Advertisement
Table of Contents
