NETGEAR GC108P Hardware Installation Manual page 30

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Note: If you are using model GC108P with an optional power adapter model EPS130W
(or if you are using model GC108PP with a 67.5W power adapter instead of the default
130W power adapter), after the switch starts for the first time with the new power adapter,
log in to the local browser interface, and select the new power adapter. For more
information, see the user manual, which you can download from
netgear.com/support/download.
To apply power:
1. Connect the DC plug of the power adapter to the DC power receptacle on the back
of the switch.
2. Connect the AC power cord receptacle to the power adapter.
3. Connect the AC power cord plug to a power source such as a wall socket or power
strip.
4. Check to see that the LEDs on the switch light correctly.
When you apply power, the Power/Cloud LED blinks green while the switch starts.
After about one minute, the switch completes its startup process, the Power/Cloud
LED turns solid green or solid blue, and the port LEDs for attached devices light:
• Power/Cloud LED turns solid green. One of the following conditions applies:
- The management mode of the switch is NETGEAR Insight (the default mode)
but the switch is not yet added to an Insight managed network.
- The management mode of the switch is NETGEAR Insight but the switch is
not yet connected to the Insight cloud management server.
- You used the local browser interface to change the management mode to
Direct Connect Web-browser Interface, and, therefore, the switch does not
connect to the Insight cloud management server.
• Power/Cloud LED turns solid blue. The management mode of the switch is
NETGEAR Insight, the switch is added to an Insight managed network, and the
switch is connected to the Insight cloud management server. You can manage
and monitor the switch using the NETGEAR Insight app or Insight Cloud portal.
If the Power/Cloud LED does not light, check to see that the power cord is plugged
in correctly and that the power source is good.
Installation 30 Hardware Installation Guide