Digital Equipment DECstation 5000 Upgrade Instructions page 5

Turn Off System/Remove Cover
1.
To shut down the software and put the
system into console mode, enter:
shutdown -h now
2.
Turn off the system unit by pressing O
on the On/Off switch on the rear of the
system unit. Wait 15 seconds before
unplugging the power cord.
3.
Unplug all cables from the system unit
4.
Unscrew the captive screw. Grasp each
side of the cover and pull the cover
straight toward the front about 2 inches
(5.5 cm). Pull the cover up and off.
0
1
2
Captive
Screw
Caution: You may damage the equipment
if you do not wear an antistatic
wrist strap when working inside
the system unit.
MLO-010006