6. Loosen screw L and remove gear M.
7. Loosen screw N and remove gear P.
8. Install new gear M and tighten screw
L.
9. Install new gear P and tighten screw
N.
10. Insert the pin of gear H into one of
the holes in order to combine it prop-
erly with gears M-P.
11. Lock gear in proper position by
means of nut G.
12. Install gear F again and tighten
screw E.
13. Install belt D.
14. Shift electric motor C and simultane-
ously tighten screws B to adjust the
tension of belt D.
15. Reassemble the guard A.
– At the end of operations, check
that there are no tools or other
material near the moving parts or
in dangerous areas.
74
English language
Reel holding carriages
Operation and maintenance manual