M. J. MAILLIS GROUP SIAT BeeWrap Operation And Maintenance Manual page 54

4. Check that the power supply line has
the same specifications as those
stated in the identification plate.
5. Connect the power cable U to the
socket T.
– Once the charge process has start-
ed, display E shows a corresponding
message "b0".
Display E shows (alternatively) mes-
sage and graphic bar that show the
charge level.
– Once the charge process is complet-
ed, display E shows a corresponding
message "b9".
6. Disconnect cable U from electric
socket T.
7. Rotate selector P to position "1"
(ON) in order to activate the battery
power supply.
52
English language
Maintenance
Operation and maintenance manual