Setting Of The Door Opener Or Light Switch; Setting Of The Door Opener Times And Light Times - Busch-Jaeger Busch-WelcomeTouch 83220-SM Series Manual

®
Busch-Welcome
8.3.4

Setting of the door opener or light switch

The setting is only made on the door/light switch actuator. It shows the respective function of the device in the
®
ABB-Welcome system. The sliding switch on the device is used for setting.
8.3.5

Setting of the door opener times and light times

This setting on the system controller and the door/light switch actuator determines the operating period of the
door buzzer (from one to ten seconds). The light-on period can be set between one second and five minutes. A
separate potentiometer for both is located on the system controller. For the MDRC switch actuator and on the
flush-mounted switch actuator the same potentiometer is used for one of the two control values depending on the
position of the sliding switch.
| 2CKA001473B7474
Addressing
— 42 —