Busch-Jaeger Busch-WelcomeTouch 83220-SM Series Manual page 25

®
Busch-Welcome
Foreign language is set
If a foreign language has been set, take the following steps for a reset:
1. Tip on the "Settings" button below the display.
2. In the list field of the "Settings" display (on the left in the display) tip on the 4th entry from the
top (this entry is marked with a flag).
3. In the "Settings" display, tip on the button at the bottom right (adjust).
– The device changes to the "Language" display.
4. In the list field (1) of the "Language" display (on the left in the display) tip on your language.
5. In the "Language" display, tip on the button at the bottom right (3) (ok).
– The device changes the language.
– The device changes back to the start page.
The language has been changed.
| 2CKA001473B7474
Fig. 18: Foreign language is set
Operation
— 25 —