Setting The Address Of The Indoor Station - Busch-Jaeger Busch-WelcomeTouch 83220-SM Series Manual

Table of Contents

Advertisement

®
Busch-Welcome
8.3.3

Setting the address of the indoor station

Fig. 35: Rotary switch and switch on the indoor station (example)
No.
Designation
1
Address of the associated outdoor station
2
Ten-digit doorbell button
3
Single digit doorbell button
4
Switch M/S, master/slave
5
Switch RC, terminal resistor
At the indoor stations the apartment is assigned via the setting of the address. Up to 99 apartments can be
addressed within an ABB-Welcome
be located with the same address. The four indoor stations are called when the assigned doorbell push-button is
pressed.
The address of an indoor station (e.g. "15") is set with the aid of the rotary switches "X10" and "X1" at the indoor
stations, where "X10" specifies the tens digit (here "1") and "X1" the single digit (here "5"). The rotary switches
are located at the rear or outside of the indoor stations.
Setting of the standard outdoor station
For several outdoor stations in an ABB-Welcome
stations. Here the rotary switch STATION (1) is set on the address of the standard outdoor station between 1 and
4. The rotary switch is located at the rear or outside of the indoor stations.
Setting of the main indoor station
In each apartment the switch "M/S" must be activated on one indoor station. This means "M=ON". For additional
indoor stations in the apartment the switch here must be on "M=OFF". The switch is located on the back or
outside of the indoor stations.
Setting of the terminal resistor
The terminal resistor in ABB-Welcome
terminal resistors are to be switched to "ON" for the last devices of a branch and to "OFF" for all others. The
terminal resistors are set via switch "RC" on all indoor stations as well as video indoor distributors and auxiliary
power supplies.
| 2CKA001473B7474
STATION
X10
X1
1
2
3
®
system. In each of these up to four indoor stations with the same rights can
®
system the "standard outdoor station" must be set on the indoor
®
audio only systems is always switched to "OFF". For video systems, the
ON
4
5
Addressing
— 41 —

Advertisement

Table of Contents
loading

Table of Contents