Change In The Assignment Of The Doorbell Push-Buttons ("Offset") - Busch-Jaeger Busch-WelcomeTouch 83220-SM Series Manual

®
Busch-Welcome
8.2.2

Change in the assignment of the doorbell push-buttons ("Offset")

Fig. 33: Different assignment of doorbell push-buttons
No. Designation
1 Apartment 02
2 Apartment 01
3 Outdoor station of the left building
4 Outdoor station of the entrance gate
5 Outdoor station of the right building
6 Apartment 03
7 Apartment 04
The preset addresses of the doorbell push-buttons can be changed. This means that the top doorbell push-button
on the left side is assigned to a different apartment. The other doorbell push-buttons are consecutively assigned
to the other apartments.
Fig. 33 shows three outdoor stations. The outdoor station at the gate entrance and the outdoor station at the left
building show the factory assignment of the doorbell push-buttons.
At the outdoor station of the building on the right an offset of 03 is set. The value of the "Offset" is fixed on two
rotary switches at the rear of the outdoor station. Here "K10" indicates the tens digit (here "0") and "K1" the single
digit (here "3"). The factory setting of the offset is on "01".
| 2CKA001473B7474
Addressing
— 39 —