Maintenance - HoMedics MAKEUP ARTIST MFL-8170 Instruction Manual And Warranty Information

Instructions for Use
1. Carefully remove all contents from the packaging and inspect the
product to make sure all components have been received. (Fig. 1)
2. Remove protective plastic coating from mirror face.
3. Place mirror on an even surface.
4. Adjust the mirror to either normal or magnified viewing. To do so
swivel the mirror to the viewing side of your preference while firmly
holding down the base.
5. Plug unit into a 120V household outlet.
6. Locate the On/Off switch on the cord. Turn to the On position.
7. When finished turn the On/Off switch into the Off position and
unplug the cord from the outlet.
Mirror
Casing
Figure 1
6

Maintenance

To Store
You may leave the mirror on display or you can store it in its box or
a cool, dry place.
• If you choose to display it, NEVER leave the mirror in a position
where it can reflect direct sunlight, this may cause a fire.
• Do not wrap cord around the mirror.
To Clean
Always unplug before cleaning the mirror. Never use liquids or
abrasive cleaners to clean, use only a damp cloth with a mild cleanser.
• Clean the mirror with only a commercial glass cleaner or water.
Do not submerge the mirror or use excessive water while cleaning.
• Do not plug mirror in until it is completely dry.
7