Service Factory Mode - Pioneer PRO-R04U Service Manual

1

6.7 SERVICE FACTORY MODE

To operate in Service Factory mode, use the supplied remote control unit.
A
Operation in Service Factory mode
¶ Functions whose settings are set to OFF
The settings for the following functions are set to OFF when Service Factory mode is entered (including when the "FAY"
command is received):
• Two-screen operations (input function set on the main side is selected)
• P ZOOM
• STILL
• Detection of the TRAP switch (The log in the EEPROM is retained.)
¶ User data
B
User data will be treated as follows:
• User data on picture- and audio-quality adjustments are not reflected (data stored in memory will be retained).
• Data on screen position are reset to the default values (data stored in memory will be retained).
Remote control codes in Service Factory mode
SR Function
Muting Switching the main items
C
DOWN Switching the subtitled items
UP Switching the subtitled items
Increasing the adjustment
LEFT
value
Decreasing the adjustment
RIGHT
value
SET Switching layers
INPUT Selecting input
D
INPUTxx Selecting input
CH+ Increasing the channel number
Decreasing the channel
CH-
number
Numeric keys Function: TV
BS numeric keys Function: BS
E
POWER Power OFF
FACTORY Factory OFF
MENU Menu ON
F
110
1
2
Main Function
Shifting to the next main item
Shifting downward to the next subtitled item
Shifting upward to the next upper layer
Increasing the adjustment value
Decreasing the adjustment value
Shifting downward or upward to the next lower or upper
layer
Shifting the input to the next function
Switching the input to xx
Advancing a preset channel
(effective when Function is set to TV)
Turning a preset channel backward
(effective when Function is set to TV)
Function: TV
(previously selected channel number is selected)
Function: BS
(previously selected channel number is selected)
Turning the power off
Turning Service Factory mode off
Turning Service Factory mode off and Menu mode on
2
3
Remarks
PDP-R04U
3
4
4