Dimension Drawings; Installation: Et200Isp Components - Siemens Simatic 6DL2804-1 Series Hardware Installation Manual

Dimension drawings

9.1

Installation: ET200iSP components

①
Power supply (PS)
terminal module
②
IM/EM terminal module with IM component
(IM = interface module, EM = electronic module)
③
EM/EM terminal module with I/O component
(I/O = input/output)
④
Termination module
⑤
Mounting rail
Figure 9-1 Distributed I/O device 6DL2804-xxD...Gxx with installation of ET 200iSP
Distributed I/O device 6DL2804-1xxxx & 6DL2804-2xxxx
Hardware Installation Manual, 07/2017, A5E42025214-AA
⑥
Equipotential bonding rail with terminals
⑦
Cable entry for signal lines M16 (4 to 9 mm) or
M20 (6 to 13 mm)
⑧
Cable and wiring entry for PROFIBUS M20
⑨
Screw gland for pressure/climate compensation
⑩
Cable and wiring entry for power supply M32 (13 to 21 mm)
9
35