Audiolab LIVE 24 XL User Manual page 16

Rear Panel
1
2
3
11 10
1. MIC Input Jack This Digital Mixer equips 24
microphone preamplifiers for use with all
types of microphones. The preamplifier has
a Class A input buffer which followed by a
dual-servo gain stage. This arrangement will
bring ultra-low noise and wide gain control
which help to boost signals without increas-
ing unwanted background noise.
2. Line Input Connector This Digital Mixer is
equipped with 1/4 "balanced TRS connectors
for line input. Note: Please notice that there
will be a momentary spike in the output
when plugging in a microphone or a line-level
input device, or turning phantom power on
or off. So it should be better to mute or turn
down the channel fader before changing con-
nections or turning phantom power on or off.
3. Aux Outputs These are balanced mono
outputs for each auxiliary. The Aux mixing
will be output from these 8 Aux channels.
Aux mixing can be used for monitoring and
effects processing.
4. Optional module Select our optional module
that you want for extra function. Please con-
tact with distributor to get more information
about the optional modules.
5. USB This port is for remote control or firm-
ware update.
6. Ethernet This port is for Ethernet control or
firmware update.
P. 16
AUDIOLAB Live 24 XL -
English version
9 8 7 5
6
7. Main Output This Digital Mixer features
both XLR and TRS main outputs.
8. Ctrl Out These are the balanced con-
trol-room outputs. The level is controlled
by the knob in the Control Room on the top
panel.
9. USB Audio In/Out This port is for USB audio
input and output. You can connect it to WIN-
DOWS/MAC system without any USB driver.
10. Power Input The provided power cable can
be plugged in.
11. Power Switch Push the top part of the switch
to turn on and the bottom part to turn off.
4