IMPORTANT: Do not forget to empty the Coffee Container from time to time when
grinding coffee beans.
ATTENTION: Do not operate this appliance for longer than 2 minutes at a time as
this could cause overheating. Allow to cool for at least 2 minutes after each use. Allow
appliance to cool down for 10-15 minutes after long operation.
ATTENTION: Only take the Coffee Bean Container of the motor housing when it is
completely empty. The bottom of the Coffee Bean Container is open. Lifting the
Coffee Bean Container
the content falls out.
4. As soon as the Grinding Gear stopped you can take out the content of the Coffee Container.
ATTENTION: Do not use force when the Grinding Gear stocks or stalls. Foreign
substance might be wedged in the Grinding Gear. Turn the appliance ´OFF`, unplug the
appliance and clean the appliance according to the instructions ´Care and Cleaning`. Try
to put the appliance back to operation. If the Grinding Gear is still not running take the
appliance for technical maintenance and repair to an authorised specialised reparation shop.
5. Turn the appliance ´OFF`, wait until the motor stops and unplug the appliance before
assembling/disassembling or storing.
Grind Selector Control
With the different settings on the Grinding Gear you have
A
influence on the coffee you will get. You can choose the
desired fineness of grind on the Coffee Bean Container
. You will find the grind selection in the following
(Picture A)
chart:
Coarse - Percolator:
Fineness: coarse grained - for coffee in a percolator
Medium - Plunger:
Fineness: medium grained - for coffee in a plunger
Fine - Filter:
Fineness: fine grained- for filter coffee
Extra Fine - Espresso:
Fineness: extra fine grained- for espresso, latte machiato,
cappuchino
Super Fine - turkish:
Fineness: super fine grained- for turkish coffee
ATTENTION: If the Coffee Bean Container is filled with coffee beans you can
only change the Grinding Selector setting while the motor is running!
21
Need help?
Do you have a question about the Design Coffee Grinder Advanced and is the answer not in the manual?
Questions and answers