Basic Procedure For Downloading And Testing - Siemens SIMATIC S7-300 Quick Start Manual

Downloading and Testing Your User Program

Basic Procedure for Downloading and Testing

Introduction
You cannot test your program until you have downloaded it to the CPU of
your S7-300.
You can download either individual blocks or the complete user program to
the CPU of your programmable controller. Only individual blocks can be
tested.
Basic Procedure
We aim to show you the basic procedure for downloading and testing using
the TLIGHT sample program. The figure below gives a task-oriented
overview:
Figure 7-1
7-2
Procedure for downloading and testing your program
Download the user program to the CPU
Testing an STL, LAD, or FBD block:
Open the block online
Define the settings for the test display
Define the trigger conditions
Select the test environment
Start and stop the test
Procedure for Downloading and Testing the User Program
You know our system by now.
We will now describe the
individual tasks one after the other.
Primer: S7-300 Programmable Controller, Quick Start
C79000-G7076-C500-01