Table of Contents
Advertisement
2
For Your Safety
2.6
Commissioning/Decommissioning
2.6.1
Decommissioning, Storage and Commissioning
The Lambda Transmitter and the Lambda Probe form a high quality electronic system. Treat
them with care at all times, including during shut-down, transport and storage.
Shut-down
Do not switch the Lambda Transmitter off as long as the Lambda Probe is mounted; including
when the relevant facility has been shut down. Residual gases cause corrosion and may dam-
age system parts.
Do not store the instruments outdoors without protection!
When dismantling, protect cable ends and plugs against corrosion and dirt. Corroded
If possible, transport in the original packaging.
Danger of burns!
If the probe is operated when removed, there is a danger of burns on the
probe housing.
Never lay the probe on flammable material and heat it up.
Wear protective gloves
Return to service
According to chapter 4 Commissioning/Decommissioning.
2.6.2
Environmental Protection, Waste Disposal
The design of Lambda Transmitter and LS2-K is also based on environmental considerations.
The modules can easily be separated and sorted into distinct types, and recycled accordingly.
NOTICE
Always store in a dry place, if possible in the original packaging.
plugs may cause malfunction.
WARNING!
10
Advertisement
Table of Contents
