Table of Contents
Advertisement
5. INTRODUCTION
5.1
DESCRIPTION OF THE STAGE FLAME AND ITS USAGE
The Stage Flame is a device specifically designed for producing flames on stage. The Stage Flame is
intended solely to be placed on a flat surface or stage and produce brief upward flame effects (fire
balls).
Should you use the equipment in any way other than just described then you release your supplier
from all liability.
The Stage Flame can be used with approved aerosol cans and propane gas bottles. The Stage Flame
also has a large flame mode where both aerosol can and gas bottle are used at the same time.
The Stage Flame is DMX controllable. One address is used as a safety channel and one address for
the flame. A third address is used for the big flame mode.
The Stage Flame has a large number of safety features and components that are discussed later in
this manual. Read this manual carefully in its entirety before you start working with the Stage Flame.
5.2
NECESSARY ACCESSORIES
The following parts are necessary with the Stage Flame:
Manual
Table 5.1
5.3
TYPES OF GAS
The Stage Flame can use approved aerosol cans (with screw-thread connector) and propane gas
bottles.
AEROSOL CAN
Table 5.2
MFX0308
SCHUKO - POWERCON CABLE
MFX1204 – EMERGENCY STOP
GAS BOTTLE
Version 1.0
Page 6
Advertisement
Table of Contents
