Table of Contents
Advertisement
User Manual MAGICFX® Stage Flame
12. TURNING OFF
Turn off the Stage Flame as follows:
1.
2.
3.
4.
Page 21
Ensure that the DMX addresses are set to
safety mode.
Turn off the Stage Flame power button
and disconnect the powerCON cable and
DMX plugs.
If a gas bottle was used then this must be
closed first before you disconnect the
gas hose.
Wait fifteen minutes until the Stage Flame
is cooled off before you remove the
aerosol can and pack up the Stage Flame.
Advertisement
Table of Contents
