Milwaukee M18 BPFPCCS Operator's Manual page 3

• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range
instructions. Charging
temperatures outside the specified range may
damage the battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified
•
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
ADDITIONAL BATTERY SAFETY RULES
To
WARNING
personal injury,
damage due to short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid
to flow i nside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
SPECIFIC SAFETY RULES FOR
BACKPACK SPRAYER
Risk of fire or explosion. Do
WARNING
•
not spray flammable liquids
such as gasoline. Do not use tool around
spark, flame, or smoke. Chemical may ignite.
•
Use the correct tank for your application.
These products are suitable for pesticide
applications (such as insecticides, fungicides,
or herbicides),
applications (such
compounds and form oil), and water supply
applications, when used in accordance with
these instructions and those supplied with the
chemicals.
• Do not use bleach, caustic (alkali) self-heating
or corrosive (acid) liquids in this sprayer. Do
not pour hot or boiling liquids into the tank.
These can corrode metal parts or weaken the
tank and hose.
Chemical sprayers shall be used only with
•
plant protection
local/national regulatory authorities for plant
protection products for use with backpack
sprayers.
To reduce the risk of fire, personal injury, and
•
product damage due to a short circuit, never
immerse your tool, battery pack or charger in
fluid or allow a fluid to flow inside them. Do
not place or store tool where it can fall or be
pulled into a tub or sink. Corrosive or conduc-
tive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
•
Electric shock hazard. Never spray toward
electrical outlets.
•
Spray area must be well ventilated to avoid
hazardous fumes build-up.
•
Avoid spraying on windy days. Spray can be
blown onto people, plants, or objects that
should not be sprayed.
• Do not store chemicals in the tank. Chemicals
can degrade seals and hoses. Drain and clean
after each use.
•
Remove gloves before handling battery packs.
Chemicals are harmful to plastics.
•
Maintain your power tool. Thoroughly inspect
inside and outside
specified in
improperly
reduce the risk of fire,
and product
fertilizers, concrete
as sealants,
products approved
and examine
components before each use. Check for
cracked
clogged nozzles, and missing or damaged
parts. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
Always unplug the charger and remove the
•
the
battery pack from the charger or tool before
or at
performing any maintenance, storing, or
draining the tool. Never disassemble the tool,
battery
MILWAUKEE
Do not eat or smoke while handling or
•
operating the tool. After use, wash with hot,
soapy water to help reduce the risk of health
hazards due to exposure to chemicals.
Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you
feel the work is beyond your capability; contact
MILWAUKEE
additional information or training.
Do not use the battery compartment for
•
storage.
Maintain labels and nameplates. These carry
•
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
WARNING
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Iead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
curing
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a
well-ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
•
When transporting and handling sprayers always
by
secure the sprayer during transportation to
prevent loss, damage or injury.
SAVE THESE INSTRUCTIONS
Volts
Direct Current
Read operator's manual
Wear personal protective equipment
(PPE)
PPE
manufacturer's instructions.
Wear eye protection.
Wear gloves.
Regulatory Compliance mark (RCM).
This product meets applicable regulatory
requirements.
all
3
and deteriorated
pack or charger.
service facility for ALL repairs.
®
Tool or a trained professional for
®
service facility for a
®
Some dust created by power
sanding, sawing,
SYMBOLOGY
according to
hoses, leaks,
Contact a
grinding,
the chemical