Table of Contents
Advertisement
INSPECTION:
Carefully unpack and inspect your burnisher for shipping damage. Each unit is tested and thoroughly
inspected before shipment; any damage is the responsibility of the delivery carrier who should be
notified immediately.
ELECTRICAL:
This machine is battery operated and designed to operate on 36 volts DC (3) 12 volt batteries.
BATTERIES:
Burnishers are shipped with batteries.
3 required - Part No. 956210 12V 210 AH
We do not recommend mixing AMP hour capacities. Any alternate battery sets can be used if
they equal physical size and capacity. See page 9 for service and installation.
OPERATION:
Before starting, familiarize yourself with the machine and its controls (see "Machine Overview" and
"Control Panel" diagrams). To turn the machine ON, do the following:
1. Make sure the cover is on the machine so the safety interlock switch is in the closed
position.
2. Make sure that no battery charger is plugged into the recharge port (there is also a safety
interlock switch in this location).
3. Lift the red emergency disconnect button so it is in the up position.
4. Turn the keyswitch clockwise.
OPERATING INSTRUCTIONS
20 Hr. Rate
2
Advertisement
Table of Contents
