TTS Easi-Scope 2 User Manual page 7

Easi-Scope 2 User Guide
Pairing
Once your Easi-Scope 2 has started up, you may need to pair
your Easi-Scope 2 with your USB Receiver if:

You are using your Easi-Scope 2 for the first time or,

Your Easi-Scope 2 has previously been paired with another
USB Receiver.
The pairing procedure is as followed:

Start up your computer, Plug in your USB Receiver,
launch your Easi-Scope 2 application and switch ON
your Easi-Scope 2.

Press and Hold the Power/Pairing Button on your Easi-
Scope 2 for seven (7) seconds until the Status Indicator
flashes
has entered Pairing Mode*.

Press and Hold the Pairing Button on the USB Receiver
for three (3) seconds until the Channel Indicator LED
flashes rapidly, which indicated that your USB Receiver
has entered Pairing Mode*.

Once both devices enter pairing mode, they will initiate
the pairing process. You will shortly be able to see the
image in your Easi-Scope 2 application.
#
rapidly, which indicated that your Easi-Scope 2
6