TTS Easi-Scope 2 User Manual page 8

Easi-Scope 2 User Guide
* Pairing mode timeout is set to be 15 seconds on your Easi
Scope 2 and your USB Receiver. If pairing is not successful
within this period, your devices will return to their normal state
without being paired. Repeat steps 2 to 4 to pair your devices
again.
# The Status Indicator will not flash if you are charging the battery
of your Easi-Scope 2.
Pairing multiple Easi-Scope 2s
Your Easi-Scope 2 USB Receivers are capable of pairing up to
four (4) Easi-Scope 2s and allow you to switch between the
image sources. To pair multiple Easi-Scope 2s, follow the
procedure below.

Pair the first Easi-Scope 2 using the pairing procedure
described in the previous section.

Once completed, click the Channel Select/Pairing Button
once to switch to the next pairing channel.

The Channel Indicator LED on the USB Receiver will
move to the next channel.

Repeat the pairing procedure to pair a 2

Repeat step 2-3 to pair up to four (4) Easi-Scope 2s.
7
nd
Easi-Scope 2.