TTS Easi-Scope 2 User Manual page 5

Easi-Scope 2 User Guide
Installing Hardware Driver and Application

Plug your USB Receiver into your computer and wait for
the automatic Windows hardware installation to finish.

Insert the Installation CD into your optical drive and the
Easi-Scope 2 Installer should launch automatically. If
this doesn't start, go to ―My Computer‖, select the CD
drive and double click on setup.exe

When the Easi-Scope 2 InstallShield Wizard appears,
Click Next.

Wait for installation to be completed and then click
―Finish‖ to close the Easi-Scope 2 InstallShield Wizard.
Using your Easi-Scope 2
Charging your Easi-Scope 2
Your Easi-Scope 2 is equipped with a built-in rechargeable
battery which is charged using the mini-USB connector on the
side of your Easi-Scope 2. Fully charge the battery before your
first use.
To Charge the battery, plug-in the supplied USB cable to your
Easi-Scope 2 and to your computer. When charging your Easi-
Scope 2, the Status Indicator on your Easi-Scope 2 lights up until
the battery is fully charged.
4