Display Arp Attack-List - H3C S7500 Series Command Manual

Command Manual – ARP
H3C S7500 Series Ethernet Switches
Parameters
begin: Displays the ARP entries from the first ARP entry that contains the string
specified by the text argument.
exclude: Displays the ARP entries that do not contain the string specified by the text
argument.
include: Displays the ARP entries that contain the string specified by the text
argument.
text: String used to filter ARP entries.
Description
Use the display arp | command to display the ARP entries matching a specified rule.
Related commands: arp static, reset arp.
Examples
# Display the ARP entries that contain the string "77".
<H3C> display arp | include 77
IP Address
192.168.0.77
--- 1 entry found
# Display the ARP entries that do not contain the string "68".
<H3C> display arp | exclude 68
IP Address
10.2.72.162
--- 1 entry found
See Table 1-1

1.1.14 display arp attack-list

Syntax
display arp attack-list
View
Any view
Parameters
None
Type: S-Static D-Dynamic
MAC Address
0000-e8f5-6a4a
---
Type: S-Static D-Dynamic
MAC Address
000a-000a-0aaa
---
for the description of the output fields.
1-11
Chapter 1 ARP Configuration Commands
VLAN ID Port Name
1 Ethernet2/0/2
VLAN ID Port Name
N/A N/A
Aging Type
12 D
Aging Type
N/A S