Zanussi ZYB 460 User Information page 21

Stainless steel or aluminium appliances:
We recommend that the oven door is only cleaned using a
wet sponge and dried after cleaning with a soft cloth.
Never use steel wool, acids or abrasive products as they
can damage the oven surface. Clean the oven control
panel following the same precautions.
DO NOT clean the oven door while the glass
panels are warm. If this precaution is not
observed the glass panel may shatter.
If the door glass panel becomes chipped or has deep
scratches, the glass will be weakened and must be replaced
to prevent the possibility of the panel shattering. Contact
your local Service Centre who will be pleased to advise
further.
Replacing the oven light
Disconnect the appliance
If the oven bulb needs replacing, it must comply with the
following specifications:
- Electric power: 40 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover and restore the electrical supply.
electrolux 21
21