Sanyo FX-02 Instruction Manual page 3

6) Auto store button (AST)
Pressing momentary Auto Store Button, AST mode is engaged and AST indica-
tor lights. Pressing this button for more then 2 sec., up to 6 stations are automa-
tically preset in the AST memory (6 AM and 12 FM).
7) Preset buttons (1 to 6)
For presetting station, the unit has an electric memory circuit which is capable
of memorizing 6 AM, 12 FM and 18 (AM and FM) Auto Store Stations for a
total of 36 stations.
To memorize a program, tune in a desired station, and press and hold down the
desired preset button for at least 1 seconds.
8) Distant/Local select button (DX )
For strong local FM signal reception, the distant/local select button (DX) should
be in the local position. For a weak distant signal, the distant/local select button
on the digital display.
9) Cassette Slot
10) EJECT button (4 )
To eject the cassette, depress this button.
11) Fast Forward, Fast Rewind and Reverse button ( 44 , H , 4, )
To advance or rewind the tape at high speed, depress ( H ) button or ( 44 )
button. To stop and return to normal playback, lightly press the button which is
not pressed.
Reverse button
To reverse the tape direction, depress both buttons at the same time.
12) Tape selector button (MTL)
Set the tape select button (MTL) to select the proper equalization for the type
of tape to be used. Press the button for Metal/FeCr/CrOz tape. Re-press the but-
ton for Normal tape.
13) LCD display