Flange Adapter (Optional) - Siemens THE PROBE Operating Instructions Manual

Mounting
Mount the Probe so that the face of the sensor is at least 25 cm above the highest
Note:
anticipated level.
Threaded
The Probe is available in three
thread types: 2" NPT, 2" BSP or
PF2.
Before inserting The
Note:
Probe into its mounting hole,
ensure that the threads are of
the same type to avoid
damaging The Probe threads.

Flange Adapter (optional)

The Probe can be fitted with the optional 75 mm
(3") flange adapter for mating to 3" ANSI, DIN
65PN10 and JIS 10K3B flanges.
Sanitary (Non Intrinsically Safe)
• Mount The Probe so that the face of
Notes:
the sensor is at least 25 cm above
the highest anticipated level.
• The sanitary Probe is suitable for
chemical clean-in-place
applications to 60 °C (140 °F) only.
Ensure your cleaning chemicals are
compatible with PVDF.
Page 2
117 mm
(4.6")
61 mm
(2.4")
The Probe – INSTRUCTION MANUAL
hinged lid
7 mm
(0.3")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
thread type
74 mm
identification
(2.9")
The
optional
Probe
flange
adapter
7 mm
hinged lid
(0.3")
117 mm
(4.6")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
integral
sealing ring
61 mm
(2.4")
34 mm
(3.3")
max.
electronics
mounting
thread
sensor
53mm
(2.1")
ø max
84 mm
(3.3") max.
electronics
mounting
thread
sensor
76 mm
(2.9")
53 mm
(2.1")
ø max.
A5E32243983