Setting Up And Using The "Elise; Contents - EasyMed TensCare Elise Instructions For Use Manual

13. CONTENTS

• Elise - Pelvic Floor Exerciser
• Liberty-Vaginal probe (single person use)
• Lead
• Rechargeable Li-ion BL-4B Battery
• Charger cradle
• Mains adaptor
• Instruction booklet
• Storage pouch
25
elise au manual Rev 3.0 5/16 artwork.indd 25-26

14. SETTING UP AND USING THE "Elise"

14.1 INSTALLATION OFBATTERIES
Setting up and using the "Elise" is very simple
Step 1: Insert battery into unit.
Remove Battery Cover
Press down the centre of the battery cover and slide downwards
Insert battery
Line up the 3 connectors on the battery with the contact in the unit.
Slide in and press down. Replace Battery Cover.
Step 2: Plug the connecting lead wire into the "Elise".
Step 3: Connect the other end of the connecting lead wire to the
probe.
Step 4: To test that the battery has been fitted correctly and that
the unit is working press and hold the "ON" button for at least three
seconds. The display should appear and an audible "Beep" will be
heard. . Press and hold the "OFF" button to turn off the unit.
26