Table of Contents
Advertisement
11. USAGE MEMORY
The "Elise" has a usage memory which remembers the length of
time and average strength that has been used.
To activate hold down the Time Selector and strength UP buttons
together for 3 seconds. The screen will show the time in hours (to
the nearest hour) and strength in mA.
Hold down Time Selector and strength DOWN button together for 3
seconds to reset the memory to zero.
23
elise au manual Rev 3.0 5/16 artwork.indd 23-24
12. LEADS ALARM
The "Elise" monitors the connection and the contact between you
and probe, or pads.
If either of these goes outside of a standard range while the strength
is above 20.0 mA, the unit will flash "LEADS", beep three times,
and return strength to zero.
Check the lead and if necessary, lubricate the probe.
Time
in hours
Average
Strength
24
Advertisement
Table of Contents
