Subscribe to Our Youtube Channel
Related Manuals for Aaeon BOXER-8150AI
Summary of Contents for Aaeon BOXER-8150AI
- Page 1 BOXER-8150AI Compact Fanless Embedded AI@Edge Box PC User’s Manual 1 Last Updated: June 10, 2019...
- Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
- Page 3 Acknowledgement All other products’ name or trademarks are properties of their respective owners. NVIDIA, the NVIDIA logo, and Jetson are trademarks of the NVIDIA Corporation Microsoft Windows is a registered trademark of Microsoft Corp. Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation ...
- Page 4 Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity BOXER-8150AI Power Adapter (Option) Power Cord (Option) Phoenix Power Connector Wallmount bracket If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
- Page 5 (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page on AAEON.com for the latest version of this document. Preface...
- Page 6 All cautions and warnings on the device should be noted. All cables and adapters supplied by AAEON are certified and in accordance with the material safety laws and regulations of the country of sale. Do not use any cables or adapters not supplied by AAEON to prevent system malfunction or fires.
- Page 7 As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers. If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii.
- Page 8 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
- Page 9 China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON Embedded Box PC/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ○ ○ ○ ○ ○ ○ 及其电子组件 外部信号 ○ ○ ○ ○ ○ ○...
- Page 10 China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Embedded Box PC/ Industrial System Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
-
Page 11: Table Of Contents
Table of Contents Chapter 1 - Product Specifications..................1 Specifications ......................2 Product Notice ......................4 Chapter 2 – Hardware Information ..................5 Dimensions ....................... 6 Jumpers and connectors..................7 List of Jumpers ......................8 2.3.1 Setting Jumpers ..................8 2.3.2 Auto Power Button (CN1) .............. - Page 12 Preface...
-
Page 13: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications... -
Page 14: Specifications
OTG x 1 SATA x 1 (option) Expansion DB-9 RS-232 x 1 (option) 2 channel CANBUS x 1 (option) Power LED Indicator Linux (AAEON ACLinux 4.4, Compliance with OS Support Ubuntu 16.04) Chapter 1 – Product Specifications... - Page 15 Mechanical Mounting Wallmount Dimensions (W x H x D) 153mm(W) x 45mm(H) x 101mm(D) Gross Weight 4.40 lbs. (2 kg) Net Weight 2.20 lbs. (1 kg) Environmental Operating Temperature -4°F ~ 122°F(-20°C ~ 50°C,with 0.5 m/s AirFlow) ...
-
Page 16: Product Notice
Product Notice OTG: OTG port is ideally for flashing image only. COM1: Support 1.8 meter length cable when baud rate is 115200bps and 15 meter cable when baud rate is 9600bps. USB ports: USB ports do not support USB DVD-ROM because of file system. Storage Devices: Operating System must be installed on the eMMC drive. -
Page 17: Chapter 2 - Hardware Information
Chapter 2 Chapter 2 – Hardware Information... -
Page 18: Dimensions
Dimensions Chapter 2 – Hardware Information... -
Page 19: Jumpers And Connectors
Jumpers and connectors Chapter 2 – Hardware Information... -
Page 20: List Of Jumpers
List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers Label Function AT mode select 2.3.1 Setting Jumpers You can configure the board to match the needs of your application by setting jumpers. -
Page 21: Auto Power Button (Cn1)
2.3.2 Auto Power Button (CN1) Closed - AT Open - ATX (Default) Function 1-2 Open ATX (Default) 1-2 Closed Chapter 2 – Hardware Information... -
Page 22: List Of Connectors
List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors. Label Function Power In connector HDMI 1 connector HDMI 2 connector GIGA LAN 1 SATA connector... -
Page 23: Power In Connector (Cn2)
2.4.1 Power in connector (CN2) Signal Signal PWR IN 2.4.2 HDMI connector (CN3/CN4) Signal Signal HDMI_DATA2_P HDMI_DATA2_N HDMI_DATA1_P HDMI_DATA1_N HDMI_DATA0_P HDMI_DATA0_N HDMI_CLK_P HDMI_CLK_N HDMI_SCL HDMI_SDA HDMI_PWR HDMI_HDP Chapter 2 – Hardware Information... -
Page 24: Sata Port (Cn6)
2.4.3 SATA Port (CN6) Signal Signal SATA TX+ SATA TX- SATA RX- SATA RX+ 2.4.4 SATA PWR Port (CN7) Signal Signal Chapter 2 – Hardware Information... -
Page 25: Micro Sd (Cn8)
2.4.5 Micro SD (CN8) Signal Signal SDCARD D3 SDCARD CMD SDCARD PWR(+3.3V) SDCARD CLK SDCARD D0 SDCARD D1 SDCARD D2 SDCARD CD 2.4.6 USB 2.0 OTG connector (CN9) Signal Signal VBUS USB1- USB1+ Chapter 2 – Hardware Information... -
Page 26: Tx2 Module Connector (Cn10)
2.4.7 TX2 Module connector (CN10) Chapter 2 – Hardware Information... -
Page 27: Rtc Battery Connector (Cn11)
2.4.8 RTC Battery Connector (CN11) Signal Signal 2.4.9 UART Debug/ COM2/ CAN BUS connector (CN12) Signal Signal COM 2 RXD COM 2 TXD COM2 RTS COM 2 CTS 3.3V UART0 RXD UART0 TXD UART0 RTS UART0 CTS CAN0 H CAN0 L CAN1 H CAN1 L Chapter 2 –... -
Page 28: Usb3.0 Connector (Cn13/Cn14/Cn15/Cn16)
2.4.10 USB3.0 connector (CN13/CN14/CN15/CN16) Signal Signal VBUS_1 VBUS_2 (A)D- (B)D- (A)D+ (B)D+ (A)SSRX- (B)SSRX- (A)SSRX+ (B)SSRX+ (A)SSTX- (B)SSTX- (A)SSTX+ (B)SSTX+ Note: CN13/CN14/CN16 by PCIe FRESCO FL1100-SX Chapter 2 – Hardware Information... -
Page 29: Com Port Connector (Cn17)
2.4.11 COM port connector (CN17) RS-232 Chapter 2 – Hardware Information... -
Page 30: Lan (Rj-45) Port (Lan1)
2.4.12 LAN (RJ-45) Port (LAN1) Signal Signal MDI0+ MDI0- MDI1+ MDI1- MDI2+ MDI2- MDI3+ MDI3- Chapter 2 – Hardware Information... -
Page 31: Wall Mount Assembly
Wall Mount Assembly Chapter 2 – Hardware Information... -
Page 32: Chapter 3 - Os Flash Guide
Chapter 3 Chapter 3 – OS Flash guide... -
Page 33: Force Usb Recovery Mode
Force USB Recovery Mode To place system in Force USB Recovery Mode: Power down the device and disconnect the AC adapter. The device MUST be powered OFF, not in a suspended or sleep state. Connect the Micro-B plug on the USB cable to the Recovery (USB Micro-B) Port on the device and the other end to an available USB port on the host PC. -
Page 34: Software & Bsp
Software & BSP Please follow the steps below to install the test image. (1) Download ACLinux_4.4_ACLNX44D.NV02.BOXER-8150AI.TB5.zip image. Please check with your local sales or FAE for the test image. The file name may change without notice. (2) Unzip ACLinux_4.4_ACLNX44D.NV02.BOXER-8150AI.TB5.zip unzip ACLinux_4.4_ACLNX44D.NV02.BOXER-8150AI.TB5.zip...
Need help?
Do you have a question about the BOXER-8150AI and is the answer not in the manual?
Questions and answers