Subscribe to Our Youtube Channel
Related Manuals for Aaeon AMB-2020HT-E Series
Summary of Contents for Aaeon AMB-2020HT-E Series
- Page 1 AMB-2020HT(T)-E Series Open Frame Modular Industrial Panel PCs Version 1.0 Industrial Panel PCs Industrial Panel PCs for Industrial Automation User’s Manual AMB-2020HT(T)-E User’s Manual...
-
Page 2: Copyright Notice
The material is this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, AAEON, assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. -
Page 3: Packing List
Packing List Before installing your Panel PC, please check if the package contains the following items. AMB-2020HT(T)-E series Panel PC CD-ROM For User’s Manual, Drivers and Utilities Accessory Metal cover for LCD connector CD-ROM and Floppy drive’s cover Power cables for HDD & FDD Screws bag 50-pin Cable (1M) Power cord (1.8 M) -
Page 4: Safety & Warranty
Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. -
Page 5: Table Of Contents
Contents Copyright Notice............................2 Packing List............................... 3 Safety & Warranty............................. 4 Chapter1 General Information ......................6 Introduction..........................7 Specifications ..........................8 Touchscreen (Optional) ......................10 LCD Specifications ......................... 10 Dimensions ..........................11 Panel Mounting ........................12 Waterproof Sponge Position ....................13 Chapter 2 Jumper Settings....................... -
Page 6: Chapter1 General Information
Chapter1 General Information AMB-2020HT(T)-E User’s Manual... -
Page 7: Introduction
1.1 Introduction The AMB-2020HT(T)-E series modular system panel PCs, is the PC-base industrial computer that specially designed to keep normal operation under harsh environment, which meet the entire requirement as an industrial man machine interface (MMI). It is a full- function PC-base system with a 12.1” SVGA (800 x 600) color TFT hi-brightness, long-life time LCD display, and compact with different control modules. -
Page 8: Specifications
1.2 Specifications Features AMB-2020HT(T)-E Features (12.1 ”open frame front panel + ACS-2300 Control Box) 12.1” SVGA color TFT LCD display Open frame architecture with heavy-duty steel chassis All- in-one SBC, MediaGX 233MHz (optional) Four 16C550 RS-232C port, one RS-232C port can be set as RS-422/485 also Adjustment-panel on the rear panel Disk Driver Space for CD-ROM, FDD and HDD DiskOnChip flash disk socket... - Page 9 General Construction: Heavy-duty steel chassis Disk drive housing: a 3.5" HDD or a 2.5”HDD and Slim CD-ROM or a 2.5”HDD and Slim FDD. Dimensions: 350(W) x 275(H) x 116mm(D) Gross Weight: 10.3 Kg Environmental Operating temperature: 0° to 45℃ Vibration: Random Non-operation 2G 5 ~ 500Hz Shock: 15G-peak acceleration (11- msec.
-
Page 10: Touchscreen (Optional)
1.3 Touchscreen (Optional) Type: 8-wire, analog resistive Resolution: 1024 x 1024 Light transmi ssion: >75% Lifetime: 1 million activations Operating pressure: 50g average for finger, 25g average with non- metal stylus. Controller: RS-232 interface OS support: MS DOS, Windows 98/SE, Windows ME, Windows NT 4.0. 1.4 LCD Specifications Model AMB-2020HT-E... -
Page 11: Dimensions
1.5 Dimensions AMB-2020-E Unit:mm 248.4 Chassis Cutout Size:333*258 mm Front Bezel Size LCD Cutout Size:248.4*186.9 mm AMB-2020HT(T)-E User’s Manual... -
Page 12: Panel Mounting
1.6 Panel Mounting These display panels can be placed on a shelf or table, or mounted onto the wall. To mount them onto the wall, you need the mount ing brackets, which you will find in the accessory box. Follows the steps described below: Slide the display panel onto the wall Tighten the brackets until the display panel is firmly secured to the wall。... -
Page 13: Waterproof Sponge Position
1.7 Waterproof Sponge Position Inside sponge (the smaller one): a. Tear off the protection paper on the self-adhesive side of the inside sponge. b. Stick the sponge on the recessed area of the Aluminum bezel or customer’s own bezel. Front Bezel Back Side Adhesive Inner Sponge... -
Page 14: Chapter 2 Jumper Settings
Chapter 2 Jumper Settings This chapter provides information on how to use the jumpers and connectors on the EI5CM in order to set up a workable system. The topics covered are: Jumpers on the EI5CM… … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 2 2 Connectors on the EI5CM…... -
Page 15: Jumpers On The Ei5Cm
2.1 Jumpers on the EI5CM The jumpers on EI5CM allow you to configure your system to your applications. The following table lists the jumper functions on the board. Jumper Locations on the EI5CM SW3: CPU Voltage Selector JP10: RS232/422/485 (COM2) Selection 16 JP12: Clear CMOS JP16: DiskOnChip BIOS Expansion Address Select 17 JP14: Reset Button Connector 17... - Page 16 SW3: CPU Voltage Selector Voltage Short Jumpers Voltage Short Jumpers Voltage Short Jumpers 1.3V 9-10 2.1V 2.9V 1-2, 7-8 1.4V 3-4, 9-10 2.2V 3.0V 3-4, 7-8 1.5V 5-6, 9-10 2.3V 1-2, 3-4 3.1V 1-2, 3-4, 7-8 1.6V 3-4, 5-6, 9-10 2.4V 3.2V 5-6, 7-8...
- Page 17 JP12: Clear CMOS Follow steps to clear CMOS data. 1. Disconnect the AC power cord. 2. Short JP12 (1-2) and wait for 3 seconds. 3. Short JP12 (2-3) and replace the AC power cord. 4. Turn on the system. JP12 Setting Function Pin 1-2...
-
Page 18: Chapter 3 Bios Configuration
Chapter 3 BIOS Configuration This chapter describes the different settings available in the Award BIOS that comes with the EI5CM embedded board. The topics covered in this chapter are as follows: AMB-2020HT(T)-E User’s Manual... -
Page 19: Bios Introduction
BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your system’s ROM supports Intel/Cyrix/AMD/IDT processors in a standard IBM-AT compatible I/O system. The BIOS provides critical low- level support for standard devices such as disk drives, parallel port and serial ports. It also adds virus and password protection, as well as special support for detailed fine-tuning of the chipset controlling the entire system. -
Page 20: Bios Setup
BIOS Setup The Award BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the Award BIOS is immediately activated. Pressing the <Del> key immediately allows you to enter the Setup utility. If you are a little bit late pressing the <Del>... -
Page 21: Standard Cmos Setup
Standard CMOS Setup “Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the Embedded Little Board is already installed in a working system, you will not need to select this option. You will need to run the Standard CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged. - Page 22 Primary HDDs / Secondary HDDs The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four IDE hard disks or other IDE devices. Each channel can support up to two hard disks; the first is the “Master” and the second is the “Slave”.
- Page 23 CGA 40 Power up in 40 column mode. CGA 80 Power up in 80 column mode. MONO For Hercules or MDA, includes high resolution monochrome adapters. Halt On This field determines whether or not the system will halt if an error is detected during power up. No errors The system boot will not be halted for any error that may be detected.
-
Page 24: Bios Features Setup
BIOS Features Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. ROM / PCI ISA BIOS BIOS FEATURES SETUP AWARD SOFTWARE, INC. Virus Warning : Disabled Video BIOS Shadow : Enabled CPU Internal Cache... - Page 25 Swap Floppy Drive This item allows you to determine whether or not to enable the swap Floppy Drive. When enabled, the BIOS swaps floppy drive assignments so that Drive A becomes Drive B, and Drive B becomes Drive A. By default, this field is set to Disabled. Boot Up Floppy Seek When enabled, the BIOS will seek whether or not the floppy drive installed has 40 or 80 tracks.
- Page 26 PCI/VGA Palette Snoop Some display cards that are non-standard VGA may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA Cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
-
Page 27: Chipset Features Setup
Chipset Features Setup This menu controls the configuration of the embedded board chipset. ROM PCI/ISA BIOS CHIPSET FEATURES SETUP AWARD SOFTWARE INC. SDRAM Timing Setup 16-bit I/O Recovery (CLK) :Auto 8-bit I/O Recovery (CLK) USB Controller : Disabled Multiple Monitor :No Onboard Support Video Memory Size... - Page 28 16 Bit I/O Recovery (CLK) This field allows you to select the recovery time allowed for 16 bit I/O. 8 Bit I/O Recovery (CLK) This field allows you to select the recovery time allowed for 8 bit I/O. USB Controller This field allows you to enable or disable the USB controller on board.
-
Page 29: Power Management Setup
Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and tur n off video display after a period of inactivity. ROM PCI/ISA BIOS (2A59IM29) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. - Page 30 RTC Alarm Function This field enables or disables the RTC Alarm. PM Events The I/O events prevent the system from entering a power saving mode or can awaken the system from such a mode. When an I/O device wants to gain the attention of the operating system, it signals this by causing an IRQ to occur.
- Page 31 Reset Configuration Data This field allows you to determine whether or not to reset the configuration data. The default value is Disabled. IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to These fields allow you to determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot.
- Page 32 Load Setup Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP...
- Page 33 Primary / Secondary IDE Channel These fields allow your system’s hard disk controller to work faster. Rather than have the BIOS issue a series of commands that transfer to or from the disk drive, PIO (Programmed Input/Output) allows the BIOS to communicate with controller and CPU directly. The system supports five modes, numbered from 0 (default) to 4, which primarily differ in timing.
- Page 34 Digital I/O Index This field enables or disables the Digital I/O Index. The EI5CM has two high drive digital outputs and two digital inputs (TTL level). You can configure the digital I/O to control the oprning of the cash drawer and to sense the closing of the cash drawer. The following explains how the digital I/O is controlled via software programming.
- Page 35 STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION SAVE & EXIT SETUP Enter Password: LOAD BIOS DEFAULTS EXIT WITHOUT SAVING LOAD SETUP DEFAULTS á â à ß ESC : Quit : Select Item F10 : Save &...
- Page 36 Save & Exit Setup This option allows you to determine whether or not to accept the modifications. If you type “Y”, you will quit the setup utility and save all changes into the CMOS memory. If you type “N”, you will return to Setup utility.
Need help?
Do you have a question about the AMB-2020HT-E Series and is the answer not in the manual?
Questions and answers