Granite180.6 - Soundstream Granite 120.4 Owners And Installation Manual

GRANITE180.6

1. +I2V - Connected to fuse or circuit breaker, then battery's positive post.
2. Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.
3. Remote - Remote turn-on input from the head unit. Accepts +12V
4. LED - Indicates amplifier power on.
5. Speaker Output Connections - Channels
6. Input Level - Variable from 1OOmV to 2.5V (Channels 1 + 2).
7. Inputs - Standard RCA-type connectors (Channels
8. Speaker Output Connections - (Channels 3 + 4)
9. input level - Variable from 100mV to 2.5V (Channels 3 + 4).
10. Inputs - Standard RCA-type connectors (Channels 3 +4). Use only right channel for mono.
11. Speaker Output Connections - (Channels 5 + 6)
12. Input Level -Variable from IOOmV to 2.5V (Channels 5 + 6).
13. Inputs - Standard RCAtype connectors (Channels 5 +6). Use only right channel for mono.
[underside]
14. Channels 5 + 6 Mono/Stereo (input 5 + 6) / Stereo (input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use
"STEREO 5+6" for RCA inputs 5+6. Use "STEREO 3+4" for input from RCAs 3+4.
15. [underside] Channels 5 + 6 Crossover - Full range or high pass (150Hz,12dB/octave).
16. [underside] Channels 3 + 4 Mono/Stereo (input 3 + 4) / Stereo (Input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use
either STEREO input position with RCA inputs from Channels 3 + 4.
17. [undersidejchannels 3 + 4 Crossover - Full range or high pass (150Hz, 12dB/octave).
18. [underside] Channels
MONO position for single channel operation (only right channel is active in Mono). Use
"STEREO 1+2" for RCA inputs 1+2. Use 'STEREO 3+4" for input from RCAs 3+4.
19. [unde&de]Chann&
[underside]
20. Main Fuse - Main power supply fuse, replace only with same value.
(1 +
2
+ 2 Mono/Stereo (input I+ 2) / Stereo (input 3 + 4) Switch
1 +
2 Crossover - Full range or low pass (75Hz, 12dB/octave).
5
2). Use only right channel for mono.
1 +