Granile120.4 - Soundstream Granite 120.4 Owners And Installation Manual

GRANIlE120.4

1
MONO
1. +I2V - Connected to fuse or circuit breaker, then battery's positive post.
2. Main ground connection. Bolt to a clean chassis ground in the vehicle.
Ground -
3. Remote - Remote turn-on input from the head unit. Accepts +12V.
4. LED - indicates amplifier power on.
5. Speaker Du@ut
Connections -
6. Input Level - Variable from 100mV to 2.W (Channels
7. Inputs - Standard RCA style connectors (Channels I+ 2). Right channel only for mono.
8. Speaker Output
9. Input Level -Variable from 1OOmV to 2.5V (Channels 3 + 4).
10. Inputs - Standard RCA style connectors (Channels 3 + 4). Right channel only for mono.
11. [underside]Channels 3 + 4 Mono/Stereo
MONO position for single channel operation (only right channel is active in Mono). Use
either STEREO input position with RCA inputs from Channels 3 + 4.
12. [underside] Channels 3 + 4 Cnwsover - Select either full range or high pass (150H2,
13. [underside] Channels
MONO position for single channel operation (only right channel is active in Mono). Use
"STEREO 1+2" for RCA inputs 1+2. Use "STEREO 3+4" for RCA input 3+4.
14. [underside] Channels 1 + 2 Crossover - Select either full range or low pass (75H2,
15. [underside] Main Fuse - Main power supply fuse, replace only with same value.
5 '
6
Side View
MONO
L-J
Underside View
Channels 2
(Channels 3 + 4)
3 + 4)/Stereo (input 3 + 4) Switch
(input
2 Mono/Stereo (input
4
1 5 a
2).
2) / Stereo (input 3 + 4) Switch