Replacement Parts - LeCroy HFP1500 Instruction Manual

HFP1500 High Frequency Probe
• Probe model and serial number
• Description of failure
5. Package the probe case in a cardboard shipping box with adequate padding to avoid dam-
age in transit.
6. Mark the outside of the box with the shipping address given to you by the LeCroy repre-
sentative; be sure to add the following:
• ATTN: <RAN assigned by the LeCroy representative>
• FRAGILE
7. Insure the item for the replacement cost of the probe.
8. Ship the package to the appropriate address.

REPLACEMENT PARTS

The probe connection accessories and other common parts can be ordered through the regional
customer care centers. Refer to list below for LeCroy part numbers. Defective probes can be
replaced on an exchange basis. The replacement exchange probe will have been factory repaired,
inspected and calibrated to the same standards as a new product. In order to obtain an exchange
probe, you must return the defective probe. The returned probe should be sent back to the
regional customer care center without any accessories, manual or case.
6–2
HFP1500-OM-E Rev E