Table of Contents
Advertisement
Removal and Installation of the Replaceable Cartridge
Removing old cartridge
Installing new cartridge
The cable strain relief is polarized and fits over the probe body in one direction
only.
HFP1500-OM-E Rev E
Features and Accessories
To remove old cartridge:
1. Slide the cable strain relief over the cable away from
the probe body.
2. To release the latch, lift the part closest to the strain
relief away from the probe body and slide the car-
tridge toward the strain relief.
To install a new cartridge:
1. Slide the new cartridge onto the probe body until the
latch engages.
2. Slide the cable strain relief forward to cover the back
end of the probe body.
Note:
###
3–7
Advertisement
Table of Contents
