HFP1500 High Frequency Probe
To use the FreeHand probe holder
Installing probe into FreeHand
E. Cartridges
Replaceable Cartridge
High Frequency Cartridge
3–6
1. Slide the probe cable through the slot on the bottom
of the translucent holder section.
2. Slide probe backwards in the probe holder.
If the input tip socket gets damaged, you don't have to
replace the entire probe, because the HFP series active
probe has a removable tip socket cartridge.
PACC-MS002, package of 1.
By having a fixed tip rather than a socket, the High Fre-
quency cartridge is able to increase signal fidelity at
higher frequencies.
The High Frequency Cartridge is an optional accessory
for the HFP1500
PACC-MS003, package of 1.
HFP1500-OM-E Rev E