Braun Satin Hair 3 HD 330 Use Instructions page 6

automatically cut out. After cooling
for a few minutes, it will switch back
on automatically.
• Do not wrap the mains cord around
the appliance. Regularly check the
mains cord for wear or damage.
If the cord is damaged, it must be
replaced by an authorized Braun
Service Centre in order to avoid a
hazard.
Description
1
Switch
2
Cold shot button
3
Protection filter
4
Concentrator nozzle
5
Diffusor attachment
(only with model HD 330)
1
Switch settings
O = off
I = gentle drying
II-III = fast drying
2
Cold shot
To fix a style with cold air, press the cold shot button.
3
Protection filter
Regularly wipe the filter clean. For a thorough
cleaning, remove the filter and clean it under
running water.
Concentrator nozzle
For precise styling use the concentrator nozzle.
Diffusor attachment
Attaching the diffusor (a)
• Align the notches on the rim of the diffusor
attachment with the slots in the hair dryer.
• Push the attachment onto the hairdryer, then
turn clockwise until the bayonet lock clicks
into place.
• To remove the diffusor, turn in the opposite
direction and pull.
Volume styling
• Short to mid-length hair:
To add volume and root lift, gently guide the
diffusor fingers with a small circular motion
over your scalp. Continue section by section.
• Long hair:
First dry hair ends by placing them onto the
finger plate. Then, with the diffusor, carefully lift
6
4
5
the hair to your head and hold. Finish off the
roots with a gentle circular movement of the
diffusor fingers on the scalp to add some lift.
Subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.