Setup For Various Debuggers (Cfi Flash); Iar Embedded Workbench / Keil Mdk - Segger J-Link Series User Manual

6.5

Setup for various debuggers (CFI flash)

The setup for download into CFI-compliant memory is different from the one for
internal flash. In this section, the setup for different debuggers is explained.
6.5.1

IAR Embedded Workbench / Keil MDK

Using the J-Link flash download feature with IAR Embedded Workbench / Keil MDK is
quite simple:
First, start the debug session and open the J-Link Control Panel. In the tab "Settings"
you will find the location of the settings file.
Close the debug session and open the settings file with a text editor. Add the follow-
ing lines to the file:
[CFI]
CFISize = <FlashSize>
CFIAddr = <FlashAddr>
[GENERAL]
WorkRAMSize = <RAMSize>
WorkRAMAddr = <RAMAddr>
After this the file should look similar to the sample in the following screenshot.
J-Link / J-Trace (UM08001) © 2004-2012 SEGGER Microcontroller GmbH & Co. KG
151